Items where Subject is "Mechanical Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: A | C | D | E | H | J | K | L | M | O | P | R | S | T | Y | Z
Number of items at this level: 91.

A

ABD-RABO, Mohamed and EL-FAWAL, Mohamed and Badawy, Mohamed and Lasheen, Ashraf (1997) ENHANCEMENT OF FORCED CONVECTION DESALINATION. SECOND INTERNATIONAL WATER THECHNOLOGY CONFERENCE, 28-31 MARCH, ALEXANDRIA, EGYPT, 1997.. (Unpublished | غير منشور)

Abdel-Rehim, Zeinab and Lasheen, Ashraf (2007) Experimental and Theoritical Study of a Solar Desalination System Located in Cairo, EGYPT. ELSEVIER - DESALINATION, 217. pp. 52-64.

Abdel-Rehim, Zeinab and Lashine, Ashraf (2011) PACKED BED-PCM MATERIAL LATENT HEAT THERMAL ENERGY STORAGE SYSTEM. ENGINEERING AND SCIENTIFIC RESEARCH JOURNAL, FACULTY OF ENGINEERING – BENHA UNIVERSITY, 14.

Abdel-Rehim, Zeinab and Lashine, Ashraf (2011) A STUDY OF SOLAR DESALINATION STILL COMBINED WITH AIR CONDITIONING SYSTEM. CAIRO 12TH INTERNATIONAL CONFERENCE ON ENERGY & ENVIRONMENT HURGADA, EGYPT. (Submitted | مرسل)

Abdel-Rehim, Zeinab and Lashine, Ashraf (2011) THEORETICAL ANALYSIS OF PRODUCING COOLING AND POWER USING SOLAR THERMAL ENERGY. ENGINEERING AND SCIENTIFIC RESEARCH JOURNAL, FACULTY OF ENGINEERING – BENHA UNIVERSITY, 13. (Unpublished | غير منشور)

Abdel-Rehim, Zeinb and Lashine, Ashraf (2011) INTEGRATED SOLAR HEATING SYSTEM FOR THE IN-DOOR SWIMMING POOLS IN WINTER SEASON APPLIED TO SELECTED EGYPTIAN SITES. ENGINEERING AND SCIENTIFIC RESEARCH JOURNAL, FACULTY OF ENGINEERING – BENHA UNIVERSITY,, 13. (Submitted | مرسل)

Abdel-Rehim, Zienab and Lashine, Ashraf (2009) COMPARATIVE ANALYSIS OF HEAT TRANSFER PERFORMANCE FOR VARIOUS FIN GEOMETRIES TO PERFORM THE OPTIMUM HEAT SINK. CAIRO 11TH INTERNATIONAL CONFERENCE ON ENERGY & ENVIRONMENT, 15-18 MARCH, HURGADA, EGYPT, 2009.. (Unpublished | غير منشور)

AbdelAziz, Mohamed and Algahtani, Ali (2017) Fabrication of Wood / Polymer Composite. In: 12 th annual Research day , college of Engineering, 27/04/2017, King khaled unveristy.

Abdelaziz, Mohamed and Algahtani, Ali (2017) Processing Of Al2O3 / Polymer Composite. In: 12 th annual research day, college of engineering, 27/04/2017, King khaled unveristy, college of engineering.

Abdelmohimen, Mostafa (2016) Improving film cooling from compound angle holes by adding secondary holes branched out from the main holes. Heat and Mass Transfer, 53 (5). pp. 1805-1815. ISSN 0947-7411

Abdelmohimen, Mostafa (2015) Numerical Investigation of Film Cooling from Two Rows of Holes with Anti-Vortex Holes Attached to the Upstream Row. International Journal of Engineering and Technology Innovation, 5 (2). pp. 87-98.

Abdelmohimen, Mostafa and Higazy, Maher (2013) LES of Turbulent Mixing In Anti-Vortex Film Cooling Flows. International Journal of Multidisciplinary and Current Research, 1. pp. 146-152. ISSN 2321-3124

Abdullah Saad, Abdel-Aziz and Ali Algawazi, Abdulkareem and Saad Ali Al-Shehri, Ali and Ayedh Saeed Galalah, Ibrahim and Saeed Al-Shahrani, Mubarak and Saeed Moneef Alshahrani, Rami (1433) Design and Construction of Water-in-Glass Evacuated Tube Solar Collectors. Other thesis, King Khalid University.

Ahamed, Yasser and Riad, Mohamed and Zaky, Ahmed and Abdel-Aziz, Mohammed and Shalabi, Mohamed (2007) Investigation on the mechanical properties of sintered porous copper compacts. Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences., 5 (6). pp. 391-394. ISSN 1672-2515

Ahmedou, Sid’ Ahmed and Rouaud, Olivier and Havet, Michel (2009) Assessment of the Electrohydrodynamic Drying Process. Food Bioprocess Technol, 2 (3). pp. 240-247. ISSN 1935-5149

Alamri, Sagr and Li, Bing and Tan, KT (2018) Dynamic load mitigation using dissipative elastic metamaterials with multiple Maxwell-type oscillators. Journal of Applied Physics, 123 (9). pp. 1-14. ISSN 1089-7550

Algahtani, Ali (2013) Optimising Aluminium Alloy Surfaces for Wear and Corrosion Controlled by Plasma Electrolytic Oxidation (PEO). PhD thesis, The University of Leeds.

Alrasheedi, Nashmi Hassan and Yousfi, Mohamed Abdelbasset and Hajlaoui, Khalil and Jacem Mahfoudh, Bacem and Tourki, Zoubeir and Reza Yavari, Alain (2016) On the Modelling of the Transient Flow Behavior of Metallic Glasses: Analogy with Portevin-Le Chatelier Effect. Metals, 6 (3). pp. 1-8. ISSN 2075-4701

Amir, Kessentini (2009) EFFECT OF TOOL GEOMETRICAL PARAMETERS ON VIBRATORY BEHAVIOUR IN DRILLING. International Journal of Engineering Simulation, 1 (10). ISSN 1468-1137

Arabi, Amir (2006) DEVELOPMENT OF AN INTEGRATED SHIFT CONTROL SYSTEM FOR AUTOMATIC MANUAL TRANSMISSIONS (AMT). In: PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MECHANICAL TRANSMISSIONS, 3-7, China- Chongqing.

Arabi, Amir (2009) Development of Electronic Throttle Control System. The Scientific Journal of Al zaiem Alazhari University, 1 (7). pp. 1-19. ISSN 1858-5035

Arabi, Amir (2014) Development of Electronic Throttle Control System. In: Proceedings of the 10th Annual Scientific Research Day, 5-6 May 2014, King Khalid University, Abha.

Arabi, Amir and Da-tong, QIN and Attia, Nabil (2004) Review on development progress of automatic manual transmissions control. journal of Chongqing University-English Edition (JCQU-E), 3 (2). pp. 38-42. ISSN 1671-8224

Arabi, Amir and Datong, QIN and Ming, Ye and Zhenjun, Liu (2005) An improvement in the shift quality for Automatic Manual Transmissions (AMT) using multi-variable linear quadratic optimal control theory. Journal of Information Technology, 4 (3). pp. 239-245. ISSN 1812-5638

Arabi, Amir Ibrahim and Datong, Qin and Zhenjun, Liu (2005) A Control Strategy on Starting up of Vehicle with Automatic Manual Transmissions (AMT). Information Technology Journal, 4 (2). pp. 140-145. ISSN 1812-5638

Attia, Ahmed A.A. Attia and El-Assal, Baiumy T.A. El-Assal (2012) Experimental investigation of vapor chamber with different working fluids at different charge ratios. Ain Shams Engineering Journal, 3 (3). pp. 289-297. ISSN 2090-4479

C

C A, Saleel and A, Shaija and S, Jayaraj (2013) COMPUTATIONAL SIMULATION OF FLUID FLOW OVER A TRIANGULAR STEP USING IMMERSED BOUNDARY METHOD. International Journal of Computational Methods, 10 (4). pp. 1-29. ISSN Print: 0219-8762, Online: 1793-6969

D

Dandana, Wafa and Yousfi, M. Abdelbasset and Hajlaoui, K and Gamaoun, F and Yavari, A.R. (2017) Thermal stability and hydrogen-induced softening in Zr57Al10Cu15.4Ni12.6Nb5 metallic glass. Journal of Non-Crystalline Solids, 456. pp. 138-142. ISSN 0022-3093

Daoud, Ataf and Abou El-khair, Malak and Abdelaziz, Mohamed and Rohatgi, P (2006) Fabrication, microstructure and compressive behavior of ZC63 Mg–microballoon foam composites. Composites Science and Technology, 67. pp. 1842-1853. ISSN 0266-3538

Dupleix, Anna and Ahmedou, Sid Ahmed (2012) Rational production of veneer by IR-heating of green wood during peeling: Modeling experiments. International Journal of the Biology, Chemistry, Physics, and Technology of Wood, 67 (1). pp. 53-58. ISSN 1437-434X

E

EL-LABBAN, HASHEM and AbdelAziz, Mohamed and MAHMOUD, ESSAM (2014) Coating of 6028 Aluminum Alloy Using Aluminum Piston Alloy and Al-Si Alloy-Based Nanocomposites Produced by the Addition of Al-Ti5-B1 to the Matrix Melt. METALLURGICAL AND MATERIALS TRANSACTIONS B, 45 (5). pp. 1608-1614. ISSN 1543-1916

EL-Seesy, Ibrahim and Kamel, M. and Khattab, N. and Hassan, S.A. (2016) Solar Disinfection of Drinking Water with Polyethylene Terephthalate Bottles Coated with Nano-Titanium Dioxide. International Journal of Advanced Engineering Research and Science (IJAERS), 3 (7). pp. 76-79. ISSN 2349-6495

El-Axir, M. H and Taha, Nagy and El-Khabeery, M. M. (2008) APPLICATION OF TAGUCHI METHOD IN THE OPTIMIZATION OF CUTTING PARAMETERS FOR SURFACE INTEGRITY IN PRECISION MILLING. In: metal cutting, 8-10 jan. 2008, cairo.

El-Kady, El-Sayed Youssef and Mahmoud, Tamer Samir and El-Betar, Ahmed Abdel-Fattah and Sayed, Mohamed Abdel-Aziz (2012) Dynamic Behaviour of Cast A356/Al2O3 Aluminum Metal Matrix Nanocomposites. Materials Sciences and Applications, 3. pp. 815-820. ISSN 815-820

El-Kady, El-Sayed Youssef and Mahmoud, Tamer Samir and Sayed, Mohamed Abdel-Aziz (2011) Elevated Temperatures Tensile Characteristics of Cast A356/Al2O3 Nanocomposites Fabricated Using a Combination of Rheocasting and Squeeze Casting Techniques. Materials Sciences and Applications, 2. pp. 390-398.

El-Labban, Hashem and AbdelAziz, Mohamed and Yakout, Mostafa and Elkhatib, A Prediction of Mechanical Properties of Nano-Composites Using Vibration Modal Analysis: Application to Aluminum Piston Alloys. Materials Performance and Characterization,, 2 (1). pp. 454-467. ISSN 2165-3992

El-Labban, Hashem and Mohamed, AbdelAziz and Mahmoud, Essam (2014) Preparation and characterization of squeeze cast-Al–Si piston alloy reinforced by Ni and nano-Al2O3 particles. Journal of King Saud University – Engineering Sciences, 28 (2). pp. 230-239. ISSN 1018-3639

El-Seesy, Ibrahim and Khalil, T (2014) An Experimental Study of a Composite Photovoltaic/Thermal Collector with a Tracking Concentrator System. World Applied Sciences Journal, 31 (6). pp. 988-992. ISSN 1818-4952

Elkotb, Mohamed and Elmidany, Tawfeek and Hedia, Hasan (2007) Axial Load Capacity and Stresses in Combined Loaded Radial Roller Bearings. Scientific Journal, Faculty of Engineering, Mansoura University, 32 (2). M.13-M.20.

Elkotb, Mohamed and Elmidany, Tawfeek and Hedia, Hasan (2007) OPTIMAL INTERFERENCE IN RADIAL CYLINDRICAL ROLLER. Scientific Journal, Faculty of Engineering, Cairo University, 54 (2). pp. 189-204.

Elmidany, Tawfeek and Hedia, Hasan and Kohail, Ahmed and Elkotb, M (2006) SIMULATING OPTIMAL LOAD DISTRIBUTION IN STATICALLY RADIALLY-LOADED ROLLING BEARINGS. Scientific Journal, Faculty of Engineering, Menia University, 25 (2). pp. 88-95. ISSN 1110-242X

Elmosrati, Omar and Higazy, Maher and Moawed, Mohamed and Lashin, Ashraf (2015) Aerodynamics Analysis of a Slotted NACA4412 Wind Turbine Airfoil Leading Edge Using CFD Case One. ENGINEERING AND SCIENTIFIC RESEARCH JURNAL, FACULTY OF ENGINEERING- BENHA UNIVERSITY, 26. (Submitted | مرسل)

Elseesy, Ibrahim and Metias, M. Z. and Hassan, S. A. and Hassan, I. M. M. (2015) Numerical Analysis of Box-Type Solar Cooker Performance with Various Reflector's Orientations. Middle East Journal of Applied Sciences, 5 (4). pp. 1128-1135. ISSN ISSN 2077-4613

H

H.Sakr, M (2008) Thermal Performance of Closed Two-Phase Thermosyphon Operated Under Transverse Magnetic Field. Ain Shams university, Faculty of Engineering, 1 (1). pp. 200-210. ISSN 1687-8612

Hajlaoui, Khalil and Yousfi, M. Abdelbasset and Ouelhazi, I and Georgarakisa, K and Tourki, Z and Vaughan, G and Yavari, A. R. (2010) Kinetics of isothermal structural relaxation in metallic glasses measured by real-time diffraction using synchrotron radiation. Philosophical Magazine Letters, 91 (2). pp. 122-133. ISSN ISSN 0950–0839 print/ISSN 1362–3036 online

Hakami, Abdulrahim (2014) Anti-Hepatitis C Virus E2 Peptides using Phage Display Technology. In: 7th Saudi Student Conference, 2014 february, Edinburgh International Conference Centre (EICC). (Unpublished | غير منشور)

Helene Desmorieux, Desmorieux and jamel, madiouli and C., Herraud and H., Mouaziz (2010) Effects of size and form of Arthrospira Spirulina biomass on the shrinkage and porosity during drying. Journal of Food Engineering, 100 (100). pp. 585-595.

Hendy, Zeinab and Mostafa, M. M. and Elnono, M. A. and Lasheen, Ashraf (2013) SOLAR DESALINATION SYSTEM USING PARABOLIC COLLECTOR. MISR JOURNAL AGRICULTURE ENGINEERING, 30 (4). (Submitted | مرسل)

J

Javed, Syed and Murthy, Y.V.V. Satyanarayana and Baig, Rahmath Ulla and Rao, T. Nagarjuna (2016) Vibration analysis of a diesel engine using biodiesel fuel blended with nano particles by dual fueling of hydrogen. Journal of Natural Gas Science and Engineering, 33. pp. 217-230. ISSN 1875-5100

Jogi, Ramakrishna and Murthy, Y.V.V. Satyanarayana and Satyanarayana, M.R.S. and Rao, T. Nagarjuna and Javed, Syed (2016) Biodiesel production from degummedJatropha curcasoil using constant-temperature ultrasonic water bath. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 38 (17). pp. 2610-2616. ISSN 1556-7036

jamel, madiouli and jalila, sghaier and didier, lecomte and habib, sammouda (2012) Determination of porosity change during drying of food material. Food and Bioproducts Processing, 90. pp. 43-51. ISSN 0960-3085

K

Kessentini, Amir (2015) Dynamique non linéaire de l'opération de perçage. Edition Univerrsitaires Europeennes, Germany. ISBN 978-3-8416-6061-9

Kessentini, Amir (2007) F.E.M. OF THE DRILLING MACHINE-TOOL INCLUDING THE GYROSCOPIC EFFECT. Advances in Production Engineering and Management, 2 (2). pp. 63-78. ISSN 1854-6250

Kessentini, Amir (2010) Influence of Cutting and Geometrical Parameters on the Cutting Force in Milling. ENGINEERING, 2 (10). pp. 751-761.

Kessentini, amir (2006) SIMULATION AND MODELLING OF THE VIBRATION EFFECT ON THE HOLE FORM IN DRILLING. International journal of simulation and modeling, 5 (4). pp. 133-144. ISSN 1726-4529

Khattab, N.M and Metawee, I.B. and El-Seesy, Ibrahim and Ebrahim, M.A. and El-Shenawy, E.T. (2014) Building a Pilot Solar Integrated Complex to Produce Water, Electricity and Food for Rural and Remote Communities Part I: Solar Desalination. World Applied Sciences Journal, 32 (2). pp. 169-176. ISSN 1818-4952

kamel, bahaa tribology. Fullerenes, Nanotubes and Carbon Nanostructures.

kamel, bahaa and El Shalakany, Abou Bakr and Khattab, A and Osman, T.A and Azzam, B and Zaki, M (2018) Improved mechanical and tribological properties of A356 reinforced by MWCNTs. FULLERENES, NANOTUBES AND CARBON NANOSTRUCTURES, 26 (4). pp. 185-194. ISSN 1536-383X

kamel, bahaa and Mohamed, Alaa and El-Sherbiny, M and Abed, K. A. and Abd-Rabou, M. (2017) Rheological characteristics of modified calcium grease with graphene nanosheets. FULLERENES, NANOTUBES AND CARBON NANOSTRUCTURES, 25 (7). pp. 429-434. ISSN 1536-383X

L

Lashine, Ashraf (2012) CFD INVESTIGATION OF UNDERGROUND CAR PARK VENTILATION WITH DIFFERENT DUCTLESS JET FAN CONFIGURATIONS. ENGINEERING AND SCIENTIFIC RESEARCH JURNAL, FACULTY OF ENGINEERING – BENHA UNIVERSITY, 17.

Lashine, Ashraf (2012) HEAT TRANSFER AND FLUID FLOW OVER IN-LINE TUBE BANK USING CFD PREDICTION. ENGINEERING AND SCIENTIFIC RESEARCH JURNAL, FACULTY OF ENGINEERING – BENHA UNIVERSITY,, 17.

Li, Bing and Alamri, Sagr and Tan, KT (2017) A diatomic elastic metamaterial for tunable asymmetric wave transmission in multiple frequency bands. Scientific Reports, 7 (6226). pp. 1-14. ISSN 2045-2322

M

Mahmood, Hamayoun and Moniruzzamana, Muhammad and Yusup, Suzana and Khan, Mohammad Ilyas and Khan, Maria Jafar (2016) Kinetic modeling and optimization of biomass pyrolysis for bio-oil production. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 38 (14). pp. 2065-2071.

Mankai, souhir and madiouli, jamel and sghaier, jalila and lecomte, didier (2017) Determination of Porosity From Shrinkage Curves during Sintering of Granular Materials. drying technology, 36 (5). pp. 557-566. ISSN 1532-2300

Maughal Ahmed, Ali Baig and Sher, Afghan Khan and Ahamed, Saleel C and Ethirajan, Rathakrishnan (2012) CONTROL OF BASE FLOWS WITH MICRO JET FOR AREA RATIO OF 6.25. ARPN Journal of Engineering and Applied Sciences, 7 (8). pp. 992-1002. ISSN 1819-6608

Mellouli, Sofiene and Askri, Faouzi and Abhilash, Edalheriad and Ben Nasrallah, s (2017) Impact of using a heat transfer fluid pipe in a metal hydride-phase change material tank. Applied Thermal Engineering, 113. pp. 554-565. ISSN 1359-4311

Mellouli, Sofiene and Elarem, R and Abhilash, E and Jemni, A (2017) Performance analysis of a household refrigerator integrating a PCM heat exchanger. Applied Thermal Engineering, 125. pp. 1320-1333. ISSN 1359-4311

Mohamed, Elkotb Engineering Drawing II - Limit System. [Teaching Resource | مراجع تدريسية] (Unpublished | غير منشور)

madiouli, jamel and lecomte, didier and nganya, thomas and chavez, sofia and sghaier, jalila and sammouda, habib (2007) A Method for Determination of Porosity Change from Shrinkage Curves of Deformable Materials. drying technology, 25 (4). pp. 621-628. ISSN 0737-3937

madiouli, jamel and sghaier, jalila and orteu, jean jose and robert, laurent and lecomte, didier and sammouda, habib (2011) Non contact Measurement of the Shrinkage and Calculation of Porosity During the Drying of Banana. drying technology, 29 (12). pp. 1358-1364.

mohamed, Abdelaziz and Samir, Tamer and Abdel Aal, sayed (2008) Modeling and optimizing of factors affecting erosion–corrosion of AA6063–(TiC/Al2O3) hybrid composites by experimental design method. Materials Science and Engineering: A, 486 (1-2). pp. 313-320. ISSN 0921-5093

O

ouledsaad, fatma and sdayria, aymen and Madiouli, Jamel and Jalila, sghaier (2016) Quadrupole method: A new approach for solving the direct problem of electrical resistance tomography. Journal of King Saud University – Science. ISSN 1018-3647 (In Press | تم الاجراء)

P

Panagiotopoulos, N.T. and Yousfi, M. Abdelbasset and Georgarakis, K. and Yavari, A.r. (2016) Mechanically induced waves in metallic glass foils. Materials and Design, 90. pp. 1110-1114. ISSN 0264-1275

R

R.Y, Sakr and Fawaz, H. E. and Lashine, Ashraf (2013) FLOW CHARACTERISTICS AND HEAT TRANSFER FOR IN-PHASE TRAPEZOID AIR CHANNELS. ENGINEERING AND SCIENTIFIC RESEARCH JURNAL, FACULTY OF ENGINEERING- BENHA UNIVERSITY, 18.

S

Salem, Algarni and C A, Saleel and M, Abdul Mujeebu (2018) Air-conditioning condensate recovery and applications—Current developments and challenges ahead. Sustainable Cities and Society, 37. pp. 263-274. ISSN 2210-6707

Saxena, Abhishek and Srivastava, Ghanshyam and Tirth, Vineet (2015) Design and thermal performance evaluation of a novel solar air heater. Renewable Energy, 77. pp. 501-511. ISSN 09601481

Sid'Ahmed, Ahmedou and Michel, Havet (2009) Effect of process parameters on the EHD airflow. Journal of Electrostatics, 67 (2-3). pp. 222-227.

Syed, Javed and Baig, Rahmath Ulla and Algarni, Salem and Y.V.V., Satyanarayana Murthy and Mohammad, Masood and Mohammed, Inamurrahman (2017) Artificial Neural Network modeling of a hydrogen dual fueled diesel engine characteristics: An experiment approach. international journal of hydrogen energy, 42. pp. 14750-14774. ISSN 0360-3199

Syed, Javed and Satyanarayana Murthy, Y.V.V. and Satyanarayana, M.R.S. and Rajeswara Reddy, R. and Rajagopal, K. (2016) Effect of a zinc oxide nanoparticle fuel additive on the emission reduction of a hydrogen dual-fuelled engine with jatropha methyl ester biodiesel blends. Journal of Cleaner Production, 137. pp. 490-506. ISSN 09596526

syed, javed and Y.V.V., Satyanarayana Murthy and Baig, Rahmath Ulla and D., Prasada Rao (2015) Development of ANN model for prediction of performance and emission characteristics of hydrogen dual fueled diesel engine with Jatropha Methyl Ester biodiesel blends. Journal of Natural Gas Science and Engineering, 26. pp. 549-557. ISSN 1875-5100

T

Taha, Nagy (2005) AN INVESTIGATION INTO INTERNAL CYLINDRICAL BURNISHING OF 6061-ALUMINUM ALLOY. In: Conference: International Symposium on Advanced Materials,, 24-27, Islmabad, Pakistan.

Taha, Nagy and FAHAD AL MOJARRY, SULTAN and ALI HUSSAIN AL HADI, ZIYAD (2014) An Investigation into Internal Cylindrical Burnishing Of Steel. EngD thesis, college of engineering.

Taha, Nagy and Yehia Naser Al- Qubty, Waled and Jarallah Hussin Al- Qahtani, Fares and Saleh Mohammad Al- Wadai, Sultan and Saeed Mohammed Al-Qahtani, Eid and Salem Abdulah Al- Shahrani, Abdulaziz and Mohammed Al- Asemei, Ebraheem and Mobarak Al-Shahrani, Saeed and Mobarak Al-Qahtani, Mohammad and Mohammed Al-Shahrani, Moneef (2012) The Effect of Burnishing Parameters on Surface Roughness and Hardness. Other thesis, college of engineering.

Tawfeek, Tarik and Hemaid, A and Gaheen, O. A. (2016) An Investigation into Effect of Butt Welding Parameters on Weldment Mechanical Properties. American Journal of Mechanical Engineering, 4 (3). pp. 92-98.

Tirth, Vineet and Ray, S. and Kapoor, M. L. (2009) Effect of Squeeze Pressure on Aging and Mechanical Properties of AA2218-5 Wt Pct Al2O3 (TiO2) Composites. Metallurgical and Materials Transactions A, 40 (5). pp. 1246-1254. ISSN 1073-5623

Tirth, Vineet and Tirth, Vineet (2018) Lecture Notes Production Engineering 4 511ME-3. [Teaching Resource | مراجع تدريسية] (Unpublished | غير منشور)

Y

Yousfi, M. Abdelbasset and Hajlaoui, Khalil and Tourki, z and Yavari, A.r. (2013) Serrated Flow Model for Metallic Glasses under Compressive Loading. Acta Metall. Sin. (Engl. Lett.), 26 (5). pp. 503-508. ISSN 2194-1289

Yousfi, M.Abdelbasset and Hajlaoui, Khalil and Tourki, z. and Yavari, A. R. (2010) Constitutive RheologicalModeling of Flow Serration Behaviour inMetallic Glasses Showing Nanocrystallization during Deformation. Journal of Nanomaterials, 2011. pp. 1-8. ISSN 1687-4129

Z

Zedan, Ahmed Said and AYAD, Samir and ABDEL-HADI, Eid and GAHEEN, Osama (2006) LARGE EDDY SIMULATION FOR FLOW AROUND BUILDINGS. In: Proceedings of ICFDP 8: Eighth International Congress of Fluid Dynamics & Propulsion, December 14-17, 2006, Sharm El-Shiekh, Sinai, Egypt..

Zedan, Ahmed Said and Nasr Eldin, Sayed (2016) An Experimental Investigation of the Factors Which Affect on the Performance of a Single Basin Typical Double Slope Solar Still for Water Desalination. Energy and Power Engineering, 7 (6). pp. 270-277. ISSN ISSN Print: 1949-243X ISSN Online: 1947-3818

Zhenjun, Liu and Datong, Qin and Arabi, Amir (2006) Standing start control for vehicle with automatic manual transmissions. In: INTERNATIONAL CONFERENCE ON MECHANICAL TRANSMISSIONS.

This list was generated on Fri Apr 19 09:40:06 2019 AST.